An APC Network Management Card must be configured with network settings before it can communicate on the network. Once the cards have been configured with an IP address, Subnet Mask, and Default Gateway the cards can be accessed, managed, and controlled from other computers on the network.

How to Avoid Equipment Damage...... 1 Disconnect UPS power 1 Disconnect chassis power 1 How to Recover from a Lost Password..... 2 Preliminary Information.......... 3 New standard features 3 Existing features 3 AP9618 features 3 AP9619 features 3 AP9618U and AP9619U upgrade kits 4 Integrated Environmental Monitor feature (AP9618 and AP9619) 4 Internal analog modem feature (AP9618) 4 Related documents 4 Inventory 5 Receiving and inspection 5 Please Recycle 5 Installation in a UPS............ 6 Overview 6 Step 1: Turn off all power (Smart-UPSor Matrix-UPS)6 Step 2: Install the Network Management Card 7 Expansion/Triple Chassis Installation...... 8 Overview 8 When to use the AC adapter (AP9505) 8 Step 1: Disconnect the chassis from all power 8 Step 2: Install the Network Management Card 9. Contents Quick Configuration...........

10 Overview 10 TCP/IP configuration methods 10 APC Management Card Wizard 11 BOOTP & DHCP configuration 11 Local access to the control console 14 Remote access to the control console 15 Control console 16 How to Access a Configured Network Management Card................ Serial number crack. 17 Overview 17 Web interface 17 Telnet 17 SNMP 17 FTP 18 APC Management Card Wizard 18 Analog modem (AP9618) 18. How to Avoid Equipment Damage Disconnect UPS You do not need to turn off a Symmetra ® or a Silcon ™ model power UPS to install the Management Card. Damage to the UPS or APC Network Management Card (AP9617 or AP9618) can result if you do not remove all AC and DC power from a Smart-UPS ® or Matrix-UPS ®,Expansion Chassis, or a Triple Caution Expansion Chassis before you install the Management Card.

Turn off the equipment that connects to the UPS. Disconnect the UPS from its AC input source. Press the OFF button on the UPS for approximately five seconds to turn off the DC (battery) power. Matrix-UPS 1. Turn off the equipment that connects to the UPS.

Moved Permanently. The document has moved here. Jul 21, 2017 - Astrodynamics Formulas The app lists all the important Astrodynamics formulas. Its very useful for student to save valuable time. Jul 21, 2017 - Budget Formulas The app lists all the important Budget formulas. Its very useful for student to save valuable time. This App contains following. Jul 6, 2013 - Keratin in Albany and Latham NY, then hopefully you have noticed our Keratin Special during the month of July at all three of our locations! Kak reshatj integrali dlya chajnikov minecraft.

Turn off the circuit breaker on the rear panel of the UPS. Disconnect Make sure that any Expansion Chassis or Triple Expansion chassis power Chassis is disconnected from all power: disconnect the chassis cable from the UPS and, if the AC-to- DC Adapter (AP9505) option is used, disconnect the adapter from the chassis. How to Recover from a Lost Password You can use a local computer, a computer that connects to the Management Card through the serial port at the Management Card’s UPS, Expansion Chassis, or Triple Expansion Chassis, to access the control console.

Select a serial port at the local computer and disable any service that uses that port. Unless an APC smart-signalingcable (940-0024or 9401524) is already connected to the selected port, connect the smart-signalingcable that came with the Management Card to the selected port and to the serial port at the Management Card’s UPS or chassis. Run a terminal program (such as HyperTerminal) and configure the selected port for 2400 bps, 8 data bits, no parity, 1 stop bit, and no flow control, and save the changes. Press E NTER to display the User Name prompt. Press the reset button on the Management Card.

Press E NTER and use apc for the User Name and Password. (If you take longer than 30 seconds to log on, you will need to repeat steps 4 and 5.) 7.

Select System in the Control Console menu and User Manager in the System menu. Select Administrator and follow the on-screeninstructions to change the User Name and Password settings, both of which are now defined as apc. Press C TRL -C and log off. Reconnect any cable disconnected in step 2, and restart any service disabled in step 1. Preliminary Information AP9618U and You can use an AP9618U kit to convert an AP9617 Network AP9619U Management Card EX or an AP9619 Network Management upgrade kits Card EM into an AP9618 Network Management Card EM/ MDM. You can use an AP9619U kit to convert an AP9617 Network Management Card EX into an AP9619 Network Management Card EM. Integrated The AP9618 and AP9619 Management Cards include an Environmental Integrated Environmental Monitor that provides the following Monitor feature features: (AP9618 and • A temperature/humidly probe AP9619) • Two input contacts • Two-positionoutput relay In addition to the Integrated Environmental Monitor, an AP9618 or AP9619 Management Card can still monitor and manage an external Environmental Monitoring Unit or Environmental Monitoring Card.